$ 46.00$ 48.00



Put the legendary performance and reliability of the INTEX Instrument cable to work for you on your pedal board. INTEX Pedalboard cables are the optimal solution for effect pedals, pedal boards, or effects racks. INTEX Pedalboard cables use the same materials and build quality as their longer counterparts, Belden 8412 cable is used throughout as well as G&H TS right-angle connectors. We have customized these G&H connectors to accept a plated steel spring strain relief insuring years of serviceable duty, no heat shrink here!

Personalized engraving is available. Because of the unique hexagonal shape of the connector shell, flat surfaces allow custom engraving. Personalizing individual cables reduces the occurrence of another band mate packing away the wrong cable or worse. The longest name we’ve done is Yngwie Malmsteen, so 18 characters is the limit per line.

Additional information


Capacitance between conductors = 98 pf/M (30 pf/ft)
Jacket = 0.89mm (0.035 in)
Conductor AWG = 20 (26 X 34)
Conductor material = ETP high-conductivity copper (99.95% pure copper).
Insulation & outer jacket material = EPDM Rubber (Ethylene Propylene Diene Rubber)
Operating temperature range = -50 deg. C to +90 deg.C (-58 deg. F to 194 deg. F)
Maximum recommended pulling tension = 45.45 Kg (100 lbs)
Minimum bend radius (install) / minor axis = 70 mm (2.750 in)
EU ROHS Compliance = 01/01/2004
Nominal inductance = 0.055 uH/M (0.18 uH/ft)
Nominal conductor DC resistance @ 20 deg. C = 32 ohm/1000M (10.6 ohm/1000ft)
Nominal outer shield DC resistance @ 20 deg. C = 13.7 ohm/1000M (4.5 ohm/1000ft)


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.